What are ‘Abnormal Moisture Conditions’ according to AS 2870-2011?
Abnormal moisture conditions are those that result in foundation moisture variations beyond those for normal sites. Abnormal moisture conditions can exist prior to construction or happen from the construction, or occur after construction.
Examples of abnormal moisture conditions existing prior to construction:
- Removal of an existing building or structure likely to have significantly modified the soil moisture conditions under the footprint of the footing system of the building.
- Removal of trees prior to construction.
- Presence of trees on the building site or adjacent site.
- Unusual moisture conditions caused by drains, channels, ponds, dams, swimming pools, effluent disposal areas or tanks, which are to be maintained or removed from the site.
Examples of abnormal moisture conditions resulting from construction:
- Failure to provide adequate site drainage.
- Failure to detail or construct drainage in accordance with AS 2870-2011.
Examples of abnormal moisture conditions developing after construction:
- The effect of trees too close to a footing.
- Excessive or irregular watering of gardens adjacent to the building.
- Failure to maintain site drainage.
- Failure to repair plumbing leaks.
- Loss of vegetation from near the building.
What ‘Abnormal Moisture Conditions’ mean in plain English
Abnormal moisture conditions are situations where the moisture in the ground around a building’s foundation is different from what you’d normally expect. These conditions can be there before the building is even built, they can happen because of how the building is constructed, or they can develop after the building is finished.
Here are some examples:
Before Construction:
- Taking down an old building or structure which might have changed how moist the soil is under the new building’s foundation.
- Cutting down trees before starting to build.
- Trees already present on or near the construction site.
- Unusual wetness due to things like drains, ponds, pools, sewage areas, or tanks that are either going to stay or be removed from the site.


During Construction:
- Not making sure the site drains water properly.
- Not following the AS 2870-2011 standards when planning or building the drainage.

After Construction:
- Trees planted too close to the building’s foundation.
- Over-watering gardens next to the building.
- Not keeping up with the site’s drainage maintenance.
- Not fixing leaks in plumbing.
- Removing plants or trees near the building.



From our investigations
Abnormal moisture does not always mean visibly wet ground. In our investigations, we encounter localised wetting from leaking pipes and poor drainage, as well as drying associated with nearby trees. Both can contribute to uneven movement in reactive foundation soils. We assess the distribution of damage, floor levels, drainage conditions, and the timing of plumbing repairs, tree removal or other site changes. Where necessary, targeted plumbing tests or geotechnical investigations help establish the source and extent of the problem. Cracking alone does not prove a moisture-related cause. Seek an engineering assessment where damage progresses, repeatedly returns, or develops alongside a suspected leak or significant change in site conditions.
References
- Standards Australia, AS 2870-2011 Residential slabs and footings, Section 2 and Appendix B.




